Features

• Size range (discharge)
  2” to 6”
  50 mm to 150 mm
• Capacities
  to 2,000 gpm
  to 455 m³/hr
• Heads
  to 175 ft  
  to 53 m

Benefits

• Vortex design allows the SHW-R to pump any solids that pass through the pump suction, even stringy, fibrous or tramp material 
• Recessed impeller provides long wear life on heavy slurry applications
• The SHW-R handles much higher concentrations of air than centrifugal pumps
• Particle degradation is greatly reduced since pumped solids do not pass through the impeller 
• Temperature Sensor – Over-temperature sensors protect the motor by sounding an alarm or shutting down the unit if internal temperatures exceed safe operating limits
• Moisture detector – A twin electrode system provides double protection by detecting moisture intrusion in either the motor housing or the mechanical seal chamber
• Mechanical seals – The SHW-R incorporates Warman’s proven balanced double-seal arrangement in which both sets of seal springs are enclosed in the oil reservoir. Silicon carbide seal faces are subject to submergence pressure only for greatly extended wear life 
• Heavy-duty water end – Standard high chrome iron construction coupled with heavy section thickness provides the ultimate in protection against abrasive wear in heavy slurries
• Easy maintenance access – T-bolt construction allows rapid disassembly of the pump end for maintenance access. The heavy-duty impeller is not screwed on, but keyed to the shaft for easy removal and protection against movement 

OPTIONAL FEATURES

• Cooling jacket
• quick disconnect
• Discharge elbow
• Sparger ring 
• Slide bracket