Features 

• Size range (discharge)
  3” to 12”
  75 mm to 300 mm
• Capacities
  to 10,000 gpm
  to 2275 m3/hr
• Heads
  to 240 ft 
  to 73 m
• Pressures
  to 150 psi
  to 1,035 kPa

Benefits

• Configured volute cross-section distribute casing material at point of maximum wear for larger particles.
• Low V open cutwater design lowers slurry velocity and consequent wear and prevents separation at flows less than BEP, producing more forgiving operating range and broader efficiency band.
• Patented impeller wear ring profile reduces wear on the throatbush and impeller by reducing turbulence and restricting recirculation.
• Extended shroud impeller design reduces side-liner wear by trapping the pump-out vane tip vortices against the shroud preventing further vortex development.
• Profiled impeller vane tip profile increased radial velocity of flow in center of cane presenting inward spiral flow and reducing wear in the casing.
• "Tear Drop" frame plate liners ensure any local side wall wear occurs on the liner, not in the more expensive casing. Flat ceramic wear resistant inserts are options for very aggressive applications.
• Easy maintenance - Unique "T-liner" and spigotted fits ensure all components can be assembled easily. Casing has 3 shackle lifting points.
• Centrifugal seal performance offer deep and efficient impeller pump out vanes combine with high ratios (85%) expeller diameter produce exceptional dry sealing performance.
• Leading edge of the expelling vane is a patented shape designed to reduce tip turbulence and maximize pressure reduction and sealing effect.
• A robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.