Rugged heavy duty slurry pump
for medium to lower heads
Warman®
L series pump incorporates the same design points of the
Warman® AH® pump plus higher
efficiency impellers at an attractive initial cost.
Designed for rugged duties while
offering higher efficiencies, the
Warman® L series is
a combination of the proven
Warman® AH unique
features. The
Warman® L series
provides the widest range of hydraulics from the 3/4" to a 26"
discharge pumps. The 3/4" is perfect for the laboratory or in
demonstration plants.
Click on images below to enlarge
Features / Benefits
- Size range (discharge)
.75” to 26”
20 mm to 650 mm
- Capacities
to 45,000 gpm
to 10,225 m3/hr
- Heads
to 180 ft
to 55 m
- Pressures
to 250 psi
to 1,725 kPa
Benefits
- Heavy duty construction with through-bolt design provides ease
of maintenance and results in less down time
- Ductile iron fully lined casing provides durability, strength
and long service life
- Large diameter, slow turning, high efficiency impellers (up to
90%+) result in maximum wear life and lower operating costs
- Large, open internal passages reduce internal
velocities maximizing wear life resulting in lower operating
costs
- Thick elastomer or metal bolt-in liners provide superior
corrosion resistance plus offer ease of liner change-out and
intermixability to reduce over all maintenance costs and maximize
wear life
- Designed for rugged duties while offering higher
efficiencies
- Minimal shaft/impeller overhang reduces shaft deflection and
increases packing life
- Cartridge-style bearing assembly allows for maintenance in a
clean environment without removal of the pump, resulting in
reliable operation and prolonged bearing life
- Grease or oil lubrication bearing assembly options offer ease
of maintenance and reduced down time
- Full flush gland, low flow, and dry running centrifugal seals
reduce flush water usage minimizing pump operating costs
- Mechanical seals reduce flush water usage minimizing pump
operating costs
- Erosion and corrosion resistant elastomers or alloys are
available to handle solids laden and/or corrosive slurries
