When you get down to the end of any water system or plant you
will usually find a Weir Minerals Division product handling the
job. Where ever slurry, sludge or corrosion is a problem, our pumps
and valves can be relied on to do the job.
Manual override (declutching) Quarter-Turn and Multi-Turn gear operators with output torque from 100 Nm to 41000 Nm.
Quarter turn pneumatic actuator. Suitable for automation of quarter turn valves such as Ball, Butterfly and Plug valves.
The innovative Gemex® belt tensioning system design ensures maintenance is safe and easy and downtime is minimised, and is an integral part of an efficient belt transmission.
The Gemex® belt tensioning system specially adapted for the Warman® slurry pump range.
BDK Double Eccentric Butterfly valve for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
BDK Eccentric Butterfly valve for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
BDK Rubber Lined Butterfly Valves for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
Crankshaft driven three-cylinder single-acting piston pumps handling low and moderate abrasive slurries.
Crankshaft driven one or two cylinder double-acting piston pumps handling low and moderately abrasive slurries.
BDK Diaphragm Valve
Globally regarded as the industry leader in abrasion resistant rubber compounds, we now also have the enviable reputation as a global supplier of quality dredge hoses with a difference.
Wemco A range - a simple design using few components, with thick walled castings, application suited materials and a recessed impeller incorporating Vortex technology.
A simple design using few components, with thick walled castings,and a recessed impeller in connection with the Vortex technology: give Wemco pumps proven unequalled strength and reliability.
Wemco pumps can transfer fluids containing large particles- (abrasive, fibrous or delicate) for your toughest applications, while minimizing abrasion and risk of clogging.
Concentric and eccentric hose reducers are built for either suction or discharge duties and are custom manufactured to incorporate differing flange requirements.
BDK cast iron gate, globe and sluice valves, suitable for isolation, or regulation and control, in the water treatment, power, steel, chemical and processing industries.
BDK forged steel valve, suitable for isolation applications in the power, oil and gas and petrochemical industries.
The LINATEX® Cut End Hose (801) is a readymade hose assembly solution designed to accommodate urgent hose needs and less abrasive slurry applications.
Warman DWU dewatering pump
The Warman® AH® is the world’s standard for the most difficult mill duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications.
Formerly marketed under the Schabaver brand name, The Warman® SCH C centrifugal slurry pump is a rubber lined pump design making maintenance quick and easy.
The Warman® WBH® slurry pump offers more than a dozen enhancements to the state-of-the-art Warman® slurry pumping technology - meeting the productivity and cost demands in all types of environment.
The Warman® WGR pump was specifically designed for use in abrasive slurry and various chemical applications in a wide choice of sizes makes it well suited to a broad range of slurry pumping duties.
The Warman® XU medium duty slurry pump. Designed for medium to coarse slurry applications.
Designed for API specifications for heavy duty slurry applications
Designed for petrochemical slurry applications that require designs close to API
Designed for heavy duty slurry applications
Designed for clear liquids and/or fluids with low solids concentration of less than 4%
Designed for axial flow applications with solids concentration up to 30%
Designed for slurries with large diameter solids and/or stringy/fibrous materials
Hydraulically driven two-chamber single-acting high pressure hose diaphragm pumps: APEXS annular pressure exchange system for mine dewatering in one single lift.
The Cavex® air core booster produces a stable and large diameter air core. This results in increased capacity; reduced fines bypass; and higher classification efficiency.
Cavex® Dewatering Canisters overcome the capacity concerns of the small hydrocyclones by combining numerous small hydrocyclones in one assembly.
The Cavex® G4 series hydrocyclone provides extremely efficient solutions for even the most challenging extraction applications.
Cavex® Dewatering hydrocyclones are designed to provide a much higher density of underflow discharge than is possible with conventional hydrocyclone design without loss in recovery efficiency
BDK knife-edge gate valve, suitable for isolation for pulp, fibrous, paper pulp, slurries and sludge applications.
Designed as a wide body heavy duty slurry knife gate valve for highly abrasive and corrosive applications
Designed as a wafer style slurry knife gate valve for tough, abrasive and corrosive applications.
LINATEX® premium rubber is a 95% natural rubber that exhibits outstanding resilience, strength and resistance to cutting, tearing and abrasion - more than 80 years experience in handling aggressive materials.
LINATEX® VS rubber - wear resistant uncured rubber for fine slurry applications
Wear resistant linings for Ball Mill applications
Wear resistant liners for use in Scrubber Mill applications.
Designed for special nuclear grade sumps for handling radioactive sludge
Ability to custom engineer for specific customer applications for high or low radioactive wastes.
The Envirotech® RP2 peristaltic hose pump is one of the most simple and reliable positive displacement pumps available in the industry.
The ISOGATE MP CB series pinch valve is a hand wheel operated enclosed body mechanical pinch valve for positive control of abrasive and corrosive flowing media.
The Isogate® series MP OB pinch valve is specifically designed for harsh, highly abrasive flow control applications in liquid solids slurry and gas-solids pneumatic conveying services.
Crankshaft driven three-cylinder single-acting high-pressure piston diaphragm pumps handling abrasive and corrosive slurries against high pressures.
Crankshaft driven piston diaphragm pumps handling abrasive and corrosive slurries against high pressures.
The Isogate® Pneumatic Pinch Valve - series PPV 2PL is specifically designed for harsh, highly abrasive on/off control applications in liquid-solids slurry and gas-solids pneumatic conveying services.
The Isogate® PPV 1PS pinch valve is ideal for remote operation using typical plant air, and it does not require an auxiliary cylinder operator.
Linatex provides replacement wear parts for the aggregate and mining industries. We have combined the latest hard technologies with the best quenched and tempered abrasion resistant plate available.
With improved efficiencies and increased capabilities, Enduron® dewatering screens with Linatex® screen media is a combination of proven media technology and innovative screen design.
SNAP-CHUTE chute liners can be made in almost any shape or size. These wear liners are manufactured out of Dur-Elast® urethane and can be made with various mounting configurations
Quality molded wear liners last longer, require less downtime for maintenance, and are easier to replace than steel.
Accessories and materials designed in lengthen the life of your screen machines.
Wear and molded parts designed to extend the life and enhance the operation of your screen machines.
The Multiflo® MF pump units are custom-built to ensure the very best performance for your operation and survival under the toughest of operating conditions.
Weir Minerals Software is developed by the Pump Technology Centre to deliver a catalog of pump curves and technical references. REGISTRATION IS REQUIRED. CLICK TO LOG IN AND/OR REQUEST REGISTRATION.
A heavy duty all chrome wet end coupled with a motor designed and built by Weir Minerals for the most demanding applications makes this the most dependable, long lasting submersible pump you can buy.
A heavy duty all chrome wet end coupled with a motor designed and built for the most demanding applications makes the Warman® SHW the most dependable, long lasting submersible pump available.
Designed for severe duty submersible applications for abrasive/corrosive slurries.
Designed for submersible applications with large, clogging and/or stringy material
Designed for heavy duty submersible applications for abrasive/corrosive slurries.
Designed for submersible applications requiring high heads with applications having low solids content of less than 4%.
Cost effective rubber solutions for aggressive chemical applications.
Linard 60 is a silica-reinforced natural rubber product uniquely designed to provide high resilience with good cut, tear and abrasion resistance.
Linatex offers retrofit rubber and urethane screen media as your solution to greater efficiency at a competitive price.
Warman® centrifugal slurry pumps are pleased to offer Galigher® 5000 Series vertical pumps -- designed for maximum flexibility and dependability in abrasive/corrosive applications.
This robust and functional design has been value engineered to include traditional Warman pump quality at the lowest possible ownership cost.
The Warman SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer.
The Warman® WBV® pump provides substantial performance with low power consumption, making it one of the lowest total ownership cost pumps of its class.
Designed for sumps with medium or severe duty applications with abrasive and/or corrosive slurries
Designed for sumps requiring high flow rates with applications having low solids content of less than 4%
Designed for sumps requiring high capacities and/or fluids containing abrasive solids and/or slurry mixtures
Designed for sumps with abrasive and/or corrosive slurries
Designed for sumps with high capacity requirements with moderate head for moderate solids concentrations of less than 20%
Designed for sumps requiring high heads with applications having low solids content of less than 4%
Designed for slurry sumps requiring vertical pumps with moderate solids
Designed for sumps with heavy concentration of abrasive slurries with
Designed for sumps requiring medium heads with applications having low solids content of less than 4%
The strength of Floway Pumps' Vertical Water Pump lies in the superiortiy of our engineering expertise, low vibration designs, highest quality materials and customer service.
Weir Minerals Service Centres are commited to providing resources, knowledge and service to initiate long term measurable total ownership cost reduction.
Find your local service centre »