Product finder
Sand and gravel is mined and treated in a variety of ways throughout the world. Our hard iron dredge and gravel pumps as well as our rubber lined slurry pumps and slurry valves are widely used throughout this industry world wide.
Wherever roads, buildings and infrastructure are constructed around the world substantial quantities of sand and gravel are usually required in close proximity to the construction site. This often involves dredging and washing of the sand and/or gravel to remove undesirable impurities from the material and to meet the required specification. Weir Minerals slurry pumps, slurry valves and cyclones have become accepted and are usually first choice throughout this global industry for life.
The Isogate® Autoball™ AB3 valve is specially designed to enable quick changeover between duty and standby pumps in the toughest slurry applications.
Globally regarded as the industry leader in abrasion resistant rubber compounds, we now also have the enviable reputation as a global supplier of quality dredge hoses with a difference.
Concentric and eccentric hose reducers are built for either suction or discharge duties and are custom manufactured to incorporate differing flange requirements.
The LINATEX specialty hose range incorporates slurry and chemical mining hose, dredge hose and a wide variety of preformed bends available with a versatile array of end types.
The LINATEX® Cut End Hose (801) is a readymade hose assembly solution designed to accommodate urgent hose needs and less abrasive slurry applications.
The Linatex Hard Wall Mining Hose (808) range of custom hoses is designed for the most arduous of mining and industrial duties.
The Warman® AHP/AHPP high pressure pump allows the user to operate several pumps in series all consolidated into one pump house saving the expense of supporting systems.
Designed for easy maintenance, durability and the lastest Flue Gas Desulpherization (FGD) technology
Formerly marketed under the brand name Schabaver, the Warman® SCH C centrifugal slurry pump is rubber lined pump design which makes maintenance quick and easy.
Warman® 1000 pump is a proven horizontal end suction centrifugal pump that will reliably and economically handle abrasive and corrosive medium duty services. Formerly marketed as Vacseal and Galigher.
The Warman® SLR pump is designed for medium duty slurry handling duties where slurry conditions are less arduous and use of a heavy duty slurry pump cannot be justified.
Designed for medium duty slurry handling duties where slurry conditions are less arduous and use of a heavy duty slurry pump cannot be justified.
Formerly marketed under the Schabaver brand name, The Warman® SCH C centrifugal slurry pump is a rubber lined pump design making maintenance quick and easy.
The Warman® WBH® slurry pump offers more than a dozen enhancements to the state-of-the-art Warman® slurry pumping technology - meeting the productivity and cost demands in all types of environment.
The Warman® WGR pump was specifically designed for use in abrasive slurry and various chemical applications in a wide choice of sizes makes it well suited to a broad range of slurry pumping duties.
The Warman® XU medium duty slurry pump. Designed for medium to coarse slurry applications.
The Warman® HH/H/HRM pump lines were designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, with a single pump - not multiple pumps in series.
The Warman® AH® is the world’s standard for the most difficult mill duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications.
Designed for rugged duties while offering higher efficiencies, the Warman® L series is a combination of the proven Warman® AH unique features plus higher efficiency impellers at an attractive cost.
The Warman® MC Mill Circuit slurry easily manages large size particles in dense abrasive slurries. Metal and Rubber lined available.
Designed to handle heavy froth, the Warman® Horizontal Froth pump has a unique inlet and impeller design that is very successful where others fail.
The Warman® MD pump meets the demands/rigors of contractor and aggregate dredging; providing superior resistance to wear, increased efficiencies, ease of maintenance and enhanced production.
The Warman® HTP pump line represents the highest pressure-rated, large, lined pumps available with priority given to increased safety, wear life, and reliability.
The Hydrau-Flo valve system is a safer, cleaner and more reliable refuelling product that prevents overfilling, spillage and tank rupture.
Cavex® Dewatering Canisters overcome the capacity concerns of the small hydrocyclones by combining numerous small hydrocyclones in one assembly.
The Cavex® air core booster produces a stable and large diameter air core. This results in increased capacity; reduced fines bypass; and higher classification efficiency.
The Cavex® CVX DE double classification hydrocyclone improves the total classification efficiency, increasing separation sharpness and reducing bypass of fines to the underflow.
The Cavex® ReCyclone® - a double classification unit in just one stage. This improves the total classification efficiency, increasing separation sharpness and reducing bypass of fines to the underflow
Cavex® Hydrocyclones rubber compounds are specially formulated by material scientists within Weir Minerals to give superior wear life in many applications.
Cavex® CVX ceramic tile lined hydrocyclones are designed to endure the arduous duties with coarse particle sizing where other materials are not suitable.
The Cavex® hydrocyclones are lightweight and complete with easy Victaulic connections -- ideally suited for low wear applications for fine particles/processes not favourable for rubber liners.
The Monolithic drop in replaceable ceramic liners are specifically designed for highly abrasive ores/processes where the chemistry is not suitable for rubber liners.
These hydrocyclones provide exceptional performance in treating coarse and sharp particles. These hydrocyclones are ideally suited dense media applications where density separation is important.
The Cavex® G4 series hydrocyclone provides extremely efficient solutions for even the most challenging extraction applications.
The Cavex® G3 series hydrocyclone classification efficiency is maintained long after the efficiencies of other hydrocyclones have deteriorated.
Cavex® Dewatering hydrocyclones are designed to provide a much higher density of underflow discharge than is possible with conventional hydrocyclone design without loss in recovery efficiency
Designed as a wide body heavy duty slurry knife gate valve for highly abrasive and corrosive applications
The Isogate® WH series heavy duty knife gate slurry valve is specially designed for tough, abrasive and corrosive high pressure slurry applications.
Designed as a wafer style slurry knife gate valve for tough, abrasive and corrosive applications.
LINATEX® premium rubber is a 95% natural rubber that exhibits outstanding resilience, strength and resistance to cutting, tearing and abrasion - more than 80 years experience in handling aggressive materials.
LINATEX® VS rubber - wear resistant uncured rubber for fine slurry applications
Designed for front or rear discharge mixers; main discharge chute liners available for some brands
Long-lasting protection that resists impact, abrasion, and build-up of concrete, while also offering ease of installation and reduction of costly maintenance and downtime
Mill lining design and wear materials that last longer and are easier and faster to change out are the solution to the requirement for increased mill availability. Vulco liners meet both needs.
The Isogate® series MP OB pinch valve is specifically designed for harsh, highly abrasive flow control applications in liquid solids slurry and gas-solids pneumatic conveying services.
The ISOGATE MP CB series pinch valve is a hand wheel operated enclosed body mechanical pinch valve for positive control of abrasive and corrosive flowing media.
The Isogate® Pneumatic Pinch Valve - series PPV 2PL is specifically designed for harsh, highly abrasive on/off control applications in liquid-solids slurry and gas-solids pneumatic conveying services.
The Isogate® PPV 1PS pinch valve is ideal for remote operation using typical plant air, and it does not require an auxiliary cylinder operator.
Multiflo® ME Electric pontoon pump units - Weir Minerals heavy duty range of self priming, pontoon mounted, electric driven pump units
Linatex provides replacement wear parts for the aggregate and mining industries. We have combined the latest hard technologies with the best quenched and tempered abrasion resistant plate available.
Tank-like devices that separate particles based on their size and density relative to another particle
LINATEX G3 Rotary Screens form an integral part of the full range of process equipment circuits operating across many industries around the globe.
Linatex Horizontal Linear Motion Screening Equipment has met with tremendous success in the highly demanding and competitive mining industries throughout the world.
A major innovation in screening technology, the ‘Banana’ multi slope concept screening equipment is capable of achieving exceptional throughput per screening area.
With improved efficiencies and increased capabilities, Linatex Dewatering Screening Equipment is a combination of proven screen media technology and innovative screen design.
Linatex lining products give you the extra protection of ceramic, which is particularly effective in applications requiring impact and sliding abrasion resistance.
Quality molded wear liners last longer, require less downtime for maintenance, and are easier to replace than steel.
As they inflate and deflate with minimal air pressure, they break up material on interior chute surfaces.
Trunnion liners protect the inside of trunnions from the abrasive action of the material slurry.
SNAP-CHUTE chute liners can be made in almost any shape or size. These wear liners are manufactured out of Dur-Elast® urethane and can be made with various mounting configurations
Liners with a concave design that lets material agitate during the screening process, ultimately leading to better separation, more efficient washing and cleaner material.
Wear and molded parts designed to extend the life and enhance the operation of your screen machines.
Accessories and materials designed in lengthen the life of your screen machines.
The Linatex 806 Soft Wall Mining Hose range is custom built and designed to deliver outstanding wear performance in the most arduous of mining and industrial applications.
SJ submersible dewatering pumps
A heavy duty all chrome wet end coupled with a motor designed and built by Weir Minerals for the most demanding applications makes this the most dependable, long lasting submersible pump you can buy.
A heavy duty all chrome wet end coupled with a motor designed and built for the most demanding applications makes the Warman® SHW the most dependable, long lasting submersible pump available.
Cost effective rubber solutions for aggressive chemical applications.
Nitrile based rubber specifically formulated for excellent abrasionr resistance in the presence of oils and chemicals.
LINAGARD OSR - The new generation of rubber developed specifically for for the oil sands industry.
LINARD HD and HDS rubber sheet is found in applications where only the toughest and hardest rubber survives
Linard 60 is a silica-reinforced natural rubber product uniquely designed to provide high resilience with good cut, tear and abrasion resistance.
Snapdeck® 2000 raises the bar on time savings and high-capacity performance, providing increased open area, pinless panel changeout and the maximum in cost-efficiency
Constructed of any of the range of Linatex rubber products and vulcanized to a full steel backing, Linaclads are designed to take the punch of heavy impact or heaving screening loads
Urethane side-tensioned flat panel screen surfaces has set industry standards for wear life, reliability, and lowering operation costs by lasting several times longer than traditional wire screens.
Reduce downtime, increase throughput, reduce carry-over, and reduce contamination issues with Ultraflex rubber screens. Available in both modular and tensioned screens.
Snapdeck® Classic modular screen media are ideal for new or existing screening equipment, providing the efficiency of flat-deck screening plus the high performance of a specifically designed system.
Reinforced, flexible Linatex Premium Rubber screen that offers long life, efficient screening, and ease of handling.
Urethane side-tension panels engineered to offer a lightweight, long-lasting alternative to wire cloth at an affordable price.
Linatex offers retrofit rubber and urethane screen media as your solution to greater efficiency at a competitive price.
The flexibility, impact absorption, tear strength, and abrasion resistance of our rubber screen surfaces are engineered to match the material being processed
A combination of high grade wire cloth with a molded coating of premium polyurethane. The Armor covering is not just a coating; it’s molded giving the production advantages of relief tapered openings.
Weir Minerals Service Centres are commited to providing resources, knowledge and service to initiate long term measurable total ownership cost reduction.
Specialty wire screen is especially effective in processing crushed stone, sand & gravel, and materials with high moisture content.
The highest throughput of any wire screen, built for long life, easy installation, and high production.
Our innovative design elements, versus conventional screen media, delivering superior wear resistance and significantly reduced maintenance costs. Customize a system to your specific requirements.
Made from tempered, stainless, or high carbon steel provides greater durability and strengt; meaning less downtime and operating costs per ton of material.
Find your local service centre »