Product finder
Numerous long distance slurry pipelines world-wide rely on Weir Minerals division heavy duty pumps.
The high availability and cost effectiveness of the pumps is unmatched and is demonstrated by the handling of the most diverse slurries over distances of more than 300 kms.
Crankshaft driven one or two cylinder double-acting piston pumps handling low and moderately abrasive slurries.
Crankshaft driven two-cylinder double-acting vacuum piston pump applied for wellpoint dewatering, lowering the ground water table at construction sites.
Crankshaft driven three-cylinder single-acting piston pumps handling low and moderate abrasive slurries.
Concentric and eccentric hose reducers are built for either suction or discharge duties and are custom manufactured to incorporate differing flange requirements.
The LINATEX specialty hose range incorporates slurry and chemical mining hose, dredge hose and a wide variety of preformed bends available with a versatile array of end types.
The LINATEX® Cut End Hose (801) is a readymade hose assembly solution designed to accommodate urgent hose needs and less abrasive slurry applications.
The Linatex Hard Wall Mining Hose (808) range of custom hoses is designed for the most arduous of mining and industrial duties.
The Warman® AHP/AHPP high pressure pump allows the user to operate several pumps in series all consolidated into one pump house saving the expense of supporting systems.
Designed for easy maintenance, durability and the lastest Flue Gas Desulpherization (FGD) technology
Formerly marketed under the brand name Schabaver, the Warman® SCH C centrifugal slurry pump is rubber lined pump design which makes maintenance quick and easy.
Warman® 1000 pump is a proven horizontal end suction centrifugal pump that will reliably and economically handle abrasive and corrosive medium duty services. Formerly marketed as Vacseal and Galigher.
The Warman® SLR pump is designed for medium duty slurry handling duties where slurry conditions are less arduous and use of a heavy duty slurry pump cannot be justified.
Designed for medium duty slurry handling duties where slurry conditions are less arduous and use of a heavy duty slurry pump cannot be justified.
Formerly marketed under the Schabaver brand name, The Warman® SCH C centrifugal slurry pump is a rubber lined pump design making maintenance quick and easy.
The Warman® WBH® slurry pump offers more than a dozen enhancements to the state-of-the-art Warman® slurry pumping technology - meeting the productivity and cost demands in all types of environment.
The Warman® WGR pump was specifically designed for use in abrasive slurry and various chemical applications in a wide choice of sizes makes it well suited to a broad range of slurry pumping duties.
The Warman® XU medium duty slurry pump. Designed for medium to coarse slurry applications.
The Warman® HH/H/HRM pump lines were designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, with a single pump - not multiple pumps in series.
The Warman® AH® is the world’s standard for the most difficult mill duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications.
Designed for rugged duties while offering higher efficiencies, the Warman® L series is a combination of the proven Warman® AH unique features plus higher efficiency impellers at an attractive cost.
The Warman® MC Mill Circuit slurry easily manages large size particles in dense abrasive slurries. Metal and Rubber lined available.
Designed to handle heavy froth, the Warman® Horizontal Froth pump has a unique inlet and impeller design that is very successful where others fail.
The Warman® MD pump meets the demands/rigors of contractor and aggregate dredging; providing superior resistance to wear, increased efficiencies, ease of maintenance and enhanced production.
The Warman® HTP pump line represents the highest pressure-rated, large, lined pumps available with priority given to increased safety, wear life, and reliability.
LINATEX® premium rubber is a 95% natural rubber that exhibits outstanding resilience, strength and resistance to cutting, tearing and abrasion - more than 80 years experience in handling aggressive materials.
LINATEX® VS rubber - wear resistant uncured rubber for fine slurry applications
The Isogate® series MP OB pinch valve is specifically designed for harsh, highly abrasive flow control applications in liquid solids slurry and gas-solids pneumatic conveying services.
The ISOGATE MP CB series pinch valve is a hand wheel operated enclosed body mechanical pinch valve for positive control of abrasive and corrosive flowing media.
Crankshaft driven piston diaphragm pumps handling abrasive and corrosive slurries against high pressures.
Crankshaft driven two-cylinder double-acting and three-cylinder single-acting high temperature piston diaphragm pumps handling high temperature, extremely acid and caustic abrasive slurries.
Crankshaft driven three-cylinder single-acting high-pressure piston diaphragm pumps handling abrasive and corrosive slurries against high pressures.
The Isogate® Pneumatic Pinch Valve - series PPV 2PL is specifically designed for harsh, highly abrasive on/off control applications in liquid-solids slurry and gas-solids pneumatic conveying services.
The Isogate® PPV 1PS pinch valve is ideal for remote operation using typical plant air, and it does not require an auxiliary cylinder operator.
Linatex lining products give you the extra protection of ceramic, which is particularly effective in applications requiring impact and sliding abrasion resistance.
Quality molded wear liners last longer, require less downtime for maintenance, and are easier to replace than steel.
As they inflate and deflate with minimal air pressure, they break up material on interior chute surfaces.
Trunnion liners protect the inside of trunnions from the abrasive action of the material slurry.
SNAP-CHUTE chute liners can be made in almost any shape or size. These wear liners are manufactured out of Dur-Elast® urethane and can be made with various mounting configurations
Liners with a concave design that lets material agitate during the screening process, ultimately leading to better separation, more efficient washing and cleaner material.
Cost effective rubber solutions for aggressive chemical applications.
Nitrile based rubber specifically formulated for excellent abrasionr resistance in the presence of oils and chemicals.
LINAGARD OSR - The new generation of rubber developed specifically for for the oil sands industry.
LINARD HD and HDS rubber sheet is found in applications where only the toughest and hardest rubber survives
Linard 60 is a silica-reinforced natural rubber product uniquely designed to provide high resilience with good cut, tear and abrasion resistance.
Weir Minerals Service Centres are commited to providing resources, knowledge and service to initiate long term measurable total ownership cost reduction.
Find your local service centre »