Product finder
The unique combination of specialised alloys and elastomers make our products ideally suited to the double attack of wear and corrosion, where reliable slurry pumps and valves are essential in handling corrosive and erosive chemical slurries.
Weir minerals slurry pumps and valves are widely used throughout the chemical and fertilizer industry where the combination of wear and corrosion demand only the toughest and technologically advanced products. Our dedicated materials research facility in Sydney employs around 20 material scientists who are constantly developing our proprietary elastomers and alloys to better meet the tough and exacting requirements of these industries.
Lewis® Pumps acid valves feature our proprietary family of alloys LEWMET® which provides maximum corrosion resistance.
Manual override (declutching) Quarter-Turn and Multi-Turn gear operators with output torque from 100 Nm to 41000 Nm.
Quarter turn pneumatic actuator. Suitable for automation of quarter turn valves such as Ball, Butterfly and Plug valves.
Pneumatic actuator for diaphragm valves. Suitable for automation of quarter turn such as, ball, plug and butterfly valves.
A regular or full bore ball valve. Suitable for isolation and cryogenic applications in the power, oil and gas and petrochemical industries.
A regular or full bore one piece ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
A regular or full bore three piece ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
A regular or full bore trunnion mounted ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
3 piece regular or full bore trunnion mounted, three piece forge ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries
A regular or full bore trunnion mounted ball valve for burried application. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
A regular or full bore two piece ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries
The innovative Gemex® belt tensioning system design ensures maintenance is safe and easy and downtime is minimised, and is an integral part of an efficient belt transmission.
The Gemex® belt tensioning system specially adapted for the Warman® slurry pump range.
BDK Double Eccentric Butterfly valve for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
BDK Eccentric Butterfly valve for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
BDK Rubber Lined Butterfly Valves for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
BDK Triple Eccentric Butterfly valve for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
The Linatex® flat bottom classifier is a well proven performer for the hydraulic classification of particles by size or density.
Crankshaft driven three-cylinder single-acting piston pumps handling low and moderate abrasive slurries.
Crankshaft driven one or two cylinder double-acting piston pumps handling low and moderately abrasive slurries.
BDK Diaphragm Valve
Concentric and eccentric hose reducers are built for either suction or discharge duties and are custom manufactured to incorporate differing flange requirements.
BDK cast iron gate, globe and sluice valves, suitable for isolation, or regulation and control, in the water treatment, power, steel, chemical and processing industries.
BDK cast steel valve, suitable for isolation applications in the power, oil and gas and petrochemical industries
BDK Cryogenic Gate and Globe Valves - Cast and forged steel, gate and globe valves, suitable for cryogenic and isolation applications in the power, oil and gas and petrochemical industries
BDK forged steel valve, suitable for isolation applications in the power, oil and gas and petrochemical industries.
BDK globe valve, suitable for chlorine service in the power, oil and gas and petrochemical industries
The LINATEX® Cut End Hose (801) is a readymade hose assembly solution designed to accommodate urgent hose needs and less abrasive slurry applications.
The Warman® AH® is the world’s standard for the most difficult mill duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications.
Formerly marketed under the Schabaver brand name, The Warman® SCH C centrifugal slurry pump is a rubber lined pump design making maintenance quick and easy.
The Warman® WBH® slurry pump offers more than a dozen enhancements to the state-of-the-art Warman® slurry pumping technology - meeting the productivity and cost demands in all types of environment.
The Warman® WGR pump was specifically designed for use in abrasive slurry and various chemical applications in a wide choice of sizes makes it well suited to a broad range of slurry pumping duties.
Designed for API specifications for heavy duty slurry applications
Designed for petrochemical slurry applications that require designs close to API
Designed for heavy duty slurry applications
Designed for clear liquids and/or fluids with low solids concentration of less than 4%
Designed for axial flow applications with solids concentration up to 30%
Designed for slurries with large diameter solids and/or stringy/fibrous materials
Hydraulically driven two-cylinder single-acting piston pumps with hydraulically actuated cone valves handling extremley viscous slurries, sludges and paste, both organic and mineral.
Hydraulically driven two-cylinder single-acting piston pumps with transfer tube handling extremly viscous slurries, sludges and paste, both organic and mineral, with particle sizes up to 120 mm.
Hydraulically driven one-cylinder single-acting piston pumps with hydraulically actuated cone valves handling extremly viscous slurries, sludges and paste.
Cavex® CVX ceramic tile lined hydrocyclones are designed to endure the arduous duties with coarse particle sizing where other materials are not suitable.
Cavex® ceramic lined dense media cyclones feature a unique geometry designed to deliver maximum efficiency in your dense media application.
Designed as a wide body heavy duty slurry knife gate valve for highly abrasive and corrosive applications
The Isogate® WH series heavy duty knife gate slurry valve is specially designed for tough, abrasive and corrosive high pressure slurry applications.
Designed as a wafer style slurry knife gate valve for tough, abrasive and corrosive applications.
LINATEX® premium rubber is a 95% natural rubber that exhibits outstanding resilience, strength and resistance to cutting, tearing and abrasion - more than 80 years experience in handling aggressive materials.
LINATEX® VS rubber - wear resistant uncured rubber for fine slurry applications
BDK Check Valve - Uni-directional / non return check valve, suitable for the power, oil and gas and petrochemical industries
BDK Lift Check Valve - forged steel lift check valve, suitable for isolation applications in the power, oil and gas and petrochemical industries
BDK Swing Check Valve - cast steel swing check valve, suitable for isolation applications in the power, oil and gas and petrochemical industries
Designed for special nuclear grade sumps for handling radioactive sludge
Ability to custom engineer for specific customer applications for high or low radioactive wastes.
The Envirotech® RP2 peristaltic hose pump is one of the most simple and reliable positive displacement pumps available in the industry.
The ISOGATE MP CB series pinch valve is a hand wheel operated enclosed body mechanical pinch valve for positive control of abrasive and corrosive flowing media.
The Isogate® series MP OB pinch valve is specifically designed for harsh, highly abrasive flow control applications in liquid solids slurry and gas-solids pneumatic conveying services.
Crankshaft driven three-cylinder single-acting high-pressure piston diaphragm pumps handling abrasive and corrosive slurries against high pressures.
Crankshaft driven piston diaphragm pumps handling abrasive and corrosive slurries against high pressures.
The Isogate® Pneumatic Pinch Valve - series PPV 2PL is specifically designed for harsh, highly abrasive on/off control applications in liquid-solids slurry and gas-solids pneumatic conveying services.
The Isogate® PPV 1PS pinch valve is ideal for remote operation using typical plant air, and it does not require an auxiliary cylinder operator.
Linatex provides replacement wear parts for the aggregate and mining industries. We have combined the latest hard technologies with the best quenched and tempered abrasion resistant plate available.
Tank-like devices that separate particles based on their size and density relative to another particle
Linatex Horizontal Linear Motion Screening Equipment has met with tremendous success in the highly demanding and competitive mining industries throughout the world.
A major innovation in screening technology, the ‘Banana’ multi slope concept screening equipment is capable of achieving exceptional throughput per screening area.
Liners with a concave design that lets material agitate during the screening process, ultimately leading to better separation, more efficient washing and cleaner material.
SNAP-CHUTE chute liners can be made in almost any shape or size. These wear liners are manufactured out of Dur-Elast® urethane and can be made with various mounting configurations
Trunnion liners protect the inside of trunnions from the abrasive action of the material slurry.
Quality molded wear liners last longer, require less downtime for maintenance, and are easier to replace than steel.
Wear and molded parts designed to extend the life and enhance the operation of your screen machines.
Weir Minerals Software is developed by the Pump Technology Centre to deliver a catalog of pump curves and technical references. REGISTRATION IS REQUIRED. CLICK TO LOG IN AND/OR REQUEST REGISTRATION.
A heavy duty all chrome wet end coupled with a motor designed and built by Weir Minerals for the most demanding applications makes this the most dependable, long lasting submersible pump you can buy.
A heavy duty all chrome wet end coupled with a motor designed and built for the most demanding applications makes the Warman® SHW the most dependable, long lasting submersible pump available.
Designed for severe duty submersible applications for abrasive/corrosive slurries.
Designed for submersible applications with large, clogging and/or stringy material
Designed for heavy duty submersible applications for abrasive/corrosive slurries.
Designed for submersible applications requiring high heads with applications having low solids content of less than 4%.
Cost effective rubber solutions for aggressive chemical applications.
Nitrile based rubber specifically formulated for excellent abrasionr resistance in the presence of oils and chemicals.
LINAGARD OSR - The new generation of rubber developed specifically for for the oil sands industry.
Linard 60 is a silica-reinforced natural rubber product uniquely designed to provide high resilience with good cut, tear and abrasion resistance.
A combination of high grade wire cloth with a molded coating of premium polyurethane. The Armor covering is not just a coating; it’s molded giving the production advantages of relief tapered openings.
Urethane side-tension panels engineered to offer a lightweight, long-lasting alternative to wire cloth at an affordable price.
Constructed of any of the range of Linatex rubber products and vulcanized to a full steel backing, Linaclads are designed to take the punch of heavy impact or heaving screening loads
Linatex offers retrofit rubber and urethane screen media as your solution to greater efficiency at a competitive price.
Snapdeck® 2000 raises the bar on time savings and high-capacity performance, providing increased open area, pinless panel changeout and the maximum in cost-efficiency
Vertical pumps which draw upon metallurgical experience developed during decades of operation
Warman® 5000 Series vertical pumps are designed for maximum flexibility and dependability in abrasive/corrosive applications.
This robust and functional design has been value engineered to include traditional Warman pump quality at the lowest possible ownership cost.
The Warman SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer.
Designed for sumps with medium or severe duty applications with abrasive and/or corrosive slurries
Designed for sumps requiring high flow rates with applications having low solids content of less than 4%
Designed for sumps requiring high capacities and/or fluids containing abrasive solids and/or slurry mixtures
Designed for sumps with abrasive and/or corrosive slurries
Designed for sumps with high capacity requirements with moderate head for moderate solids concentrations of less than 20%
Designed for sumps requiring high heads with applications having low solids content of less than 4%
Designed for slurry sumps requiring vertical pumps with moderate solids
Designed for sumps with heavy concentration of abrasive slurries with large-diameter solids
Designed for sumps requiring medium heads with applications having low solids content of less than 4%
Steam-jacketed pumps that meet a diversity of applications for production, transfer and processing of sulphur.
Weir Minerals Service Centres are commited to providing resources, knowledge and service to initiate long term measurable total ownership cost reduction.
Find your local service centre »